Fuel Injection Cleaning2018-07-24T02:51:00+00:00

Fuel Injection Service

Since you purchased your new vehicle, dirt, varnishes and carbon deposits have been forming on the fuel injectors, valves, combustion chamber, throttle housing and the air induction intake. These build ups can rob your vehicle of performance, and if left untreated, these build ups can lead to costly repairs.

Symptoms related to carbon build up are:

  • engine pinging
  • hesitation
  • poor acceleration
  • lack of power
  • hard starting and stalling
  • rough idle
  • poor fuel economy

Our Fuel System Cleaning is a revolutionary new process that will clean your vehicle’s fuel system and remove harmful carbon deposits. Our system uses a detergent that soaks into the carbon, and softens it, so while running through the process the deposits are passed through the exhaust. The solution will not damage your vehicle’s sophisticated engine components.

After our Fuel System Cleaning cleans your engine, you will notice improved performance, acceleration and increased fuel economy.

The Automotive Maintenance and Repair Association recommends performing this service every 15,000 to 18,000 miles. Cleaning your vehicle’s fuel system is the best way to keep it driving as it should.

Fuel System Service

Today’s fuel injected vehicles rely on a clean source of fuel more than ever before. Some low cost fuel stations don’t have the cleaning agents added to their fuel that the major fuel stations do. Dirty fuel injectors can really cause some problems like reduced fuel economy, hesitation, rough idle, a hard start, sticky throttle, and failed emissions among other problems. Your fuel system needs to be maintained in order to keep system pressure at proper operating levels, fuel filters should be changed regularly, and fuel injectors should be professionally cleaned if any of these symptoms should occur. Our fuel injection cleaning service includes cleaning deposits from fuel injectors, cleaning carbon deposits on the backs of the intake valves and the combustion chamber, as well as cleaning the air intake passages in the air intake throttle body. This is achieved by disconnecting the vehicles fuel supply system and running the vehicle on a machine with a special cleaning agent for about an hour. This service really helps to insure that none of these prior symptoms may occur.

Why Do Preventive Maintenance

A properly maintained vehicle will operate more efficiently, be more dependable, last longer, and ensure a safer ride for you and your family. Your owner’s manual out-lines detailed maintenance schedules that should be performed on all your vehicle’s components and systems. These maintenance schedules are mileage driven.

Click here for our current promotions!

How do you know when your fuel injector is bad?

A faulty fuel injector will usually result in the vehicle having a misfire on that specific cylinder. There are several ways to check if it is bad, one of them being to remove it and do a flow test on it. This requires hooking it up to a special machine that will simulate the conditions the fuel injector is under when it is installed in the vehicle.

Request Appointment

Autosys, Inc.

18018 Redmond Way #19
Redmond, WA 98052

425-882-0630

Hours:
Mondays: 8:00am-5:00pm
Tues-Fri: 8:00am-6:00pm
Sat: 8:00am – 4:30pm
Sunday: closed